{"title":"Sensors \u0026 Adapters","description":null,"products":[{"product_id":"speedfactory-racing-3-bar-map-sensor-for-b-d-f-h-and-00-05-s2000-1-29-psi","title":"SpeedFactory Racing 3 Bar MAP Sensor for B\/D\/F\/H and 00-05 S2000 (1-29+PSI)","description":"\u003cmeta charset=\"UTF-8\"\u003e\n\u003cp\u003eSpeedFactory 3 Bar MAP\u003cspan\u003e (Manifold Absolute Pressure)\u003c\/span\u003e sensors use state of the art bipolar op amp circuitry with thin film resistor networks built into each micro chip.\u003c\/p\u003e\n\u003cp\u003ePressure changes are calculated on a true linear 0-5 volt scale via a specially designed silicon pressure sensor that also compensates for temperature changes. The unique ability to compensate for temperature changes allows our MAP sensor to remain a minimum of 99% accurate from 32 degrees F to 180 degrees F through out its range of scale. With the true linear pressure vs. voltage scale there is never a need to re-tune at different altitudes as with other sensors. \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eKey Features:\u003c\/strong\u003e \u003cbr\u003e\u003cspan\u003e*Precisely calculates boost pressure from 1-29+ psi\u003cbr\u003e\u003c\/span\u003e\u003cspan\u003e* 40 to 260 degrees Fahrenheit temperature operating range\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e* Able to respond from 10% of the pressure scale to 90% of the pressure scale in .001 seconds (the fastest response time of any MAP sensor on the market).\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e* Automatic temperature compensation.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e* True linear scaling for perfect drivability at all boost and vacuum levels.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e* Compatible with all aftermarket engine management systems.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e* Minimum of 99% accurate over full scale range under all conditions including temperature, altitude, and humidity changes.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e* Allows smoother engine operation, higher boost levels, and better drivability than competitors turbo MAP sensors.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e* Direct plug and play for an easy install and an OEM look. Dimensionally identical to the stock MAP sensor.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e* Each sensor is hand assembled, pressure, and function checked in the USA for unparalleled quality control prior to shipping\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eNOTE: Requires proper sensor calibration with a programmable engine management system.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFitments: B\/D\/F\/H Series Engines\u003c\/strong\u003e\u003cbr\u003e94-01 Acura Integra\u003cbr\u003e90-93 Acura Integra (will require 94-01 Integra Throttle Body)\u003cbr\u003e97-99 Acura CL All Models\u003cbr\u003e01-03 Acura CL V6 (premium only)\u003cbr\u003e99-03 Acura TL All Models\u003cbr\u003e88-00 Honda Civic All Models\u003cbr\u003e92-01 Honda Prelude All Models\u003cbr\u003e00-05 Honda S2000\u003cbr\u003e94-02 Honda Accord All 4 cyl Models\u003cbr\u003e93-97 Honda Del Sol All Models\u003cbr\u003e97-01 Honda CR-V All Models\u003c\/p\u003e","brand":"JustMac Garage","offers":[{"title":"Black","offer_id":46488002527524,"sku":"","price":108.29,"currency_code":"USD","in_stock":true},{"title":"Red","offer_id":46488002560292,"sku":"","price":108.29,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0730\/3538\/3076\/files\/image_f0c96048-7281-4e69-be8e-4faaa886858e.jpg?v=1692122709"},{"product_id":"speedfactory-racing-4-bar-map-sensor-for-b-d-f-h-and-s2000-1-43-psi","title":"SpeedFactory Racing 4 Bar MAP Sensor for B\/D\/F\/H and S2000 (1-43+PSI)","description":"\u003cmeta charset=\"UTF-8\"\u003e\n\u003cp\u003eSpeedFactory 4 Bar MAP \u003cspan\u003e(Manifold Absolute Pressure) \u003c\/span\u003esensors use state of the art bipolar op amp circuitry with thin film resistor networks built into each micro chip.\u003c\/p\u003e\n\u003cp\u003ePressure changes are calculated on a true linear 0-5 volt scale via a specially designed silicon pressure sensor that also compensates for temperature changes. The unique ability to compensate for temperature changes allows our MAP sensor to remain a minimum of 99% accurate from 32 degrees F to 180 degrees F through out its range of scale. With the true linear pressure vs. voltage scale there is never a need to re-tune at different altitudes as with other sensors. \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eKey Features:\u003c\/strong\u003e \u003cbr\u003e\u003cspan\u003e* 40 to 260 degrees Fahrenheit temperature operating range\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e* Able to respond from 10% of the pressure scale to 90% of the pressure scale in .001 seconds (the fastest response time of any MAP sensor on the market).\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e* Automatic temperature compensation.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e* True linear scaling for perfect drivability at all boost and vacuum levels.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e* Compatible with all aftermarket engine management systems.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e* Minimum of 99% accurate over full scale range under all conditions including temperature, altitude, and humidity changes.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e* Allows smoother engine operation, higher boost levels, and better drivability than competitors turbo MAP sensors.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e* Direct plug and play for an easy install and an OEM look. Dimensionally identical to the stock MAP sensor.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e* Each sensor is hand assembled, pressure, and function checked in the USA for unparalleled quality control prior to shipping\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eNOTE: Requires proper sensor calibration with a programmable engine management system.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFitments: B\/D\/F\/H Series Engines\u003c\/strong\u003e\u003cbr\u003e\u003cspan\u003e94-01 Acura Integra\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e90-93 Acura Integra (will require 94-01 Integra Throttle Body)\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e97-99 Acura CL All Models\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e01-03 Acura CL V6 (premium only)\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e99-03 Acura TL All Models\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e88-00 Honda Civic All Models\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e92-01 Honda Prelude All Models\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e00-05 Honda S2000\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e94-02 Honda Accord All 4 cyl Models\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e93-97 Honda Del Sol All Models\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e97-01 Honda CR-V All Models\u003c\/span\u003e\u003c\/p\u003e","brand":"JustMac Garage","offers":[{"title":"Black","offer_id":46488013799716,"sku":"","price":108.29,"currency_code":"USD","in_stock":true},{"title":"Red","offer_id":46488013832484,"sku":"","price":108.29,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0730\/3538\/3076\/files\/image_9304ca51-f50f-43e0-9501-5c0370fb8a7d.jpg?v=1692122917"},{"product_id":"speedfactory-racing-4-bar-map-sensor-for-k-series-1-43-psi","title":"SpeedFactory Racing 4 Bar MAP Sensor for K Series (1-43+PSI)","description":"\u003cmeta charset=\"UTF-8\"\u003e\n\u003cp\u003eSpeedFactory 4 Bar MAP \u003cspan\u003e(Manifold Absolute Pressure) \u003c\/span\u003esensors use state of the art bipolar op amp circuitry with thin film resistor networks built into each micro chip.\u003c\/p\u003e\n\u003cp\u003ePressure changes are calculated on a true linear 0-5 volt scale via a specially designed silicon pressure sensor that also compensates for temperature changes. The unique ability to compensate for temperature changes allows our MAP sensor to remain a minimum of 99% accurate from 32 degrees F to 180 degrees F through out its range of scale. With the true linear pressure vs. voltage scale there is never a need to re-tune at different altitudes as with other sensors.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eKey Features:\u003c\/strong\u003e \u003cbr\u003e* 40 to 260 degrees Fahrenheit temperature operating range\u003cbr\u003e* Able to respond from 10% of the pressure scale to 90% of the pressure scale in .001 seconds (the fastest response time of any MAP sensor on the market). \u003cbr\u003e* Automatic temperature compensation. \u003cbr\u003e* True linear scaling for perfect drivability at all boost and vacuum levels. \u003cbr\u003e* Compatible with all aftermarket engine management systems. \u003cbr\u003e* Minimum of 99% accurate over full scale range under all conditions including temperature, altitude, and humidity changes. \u003cbr\u003e* Allows smoother engine operation, higher boost levels, and better drivability than competitors turbo MAP sensors. \u003cbr\u003e* Direct plug and play for an easy install and an OEM look. Dimensionally identical to the stock MAP sensor. \u003cbr\u003e* Each sensor is hand assembled, pressure, and function checked in the USA for unparalleled quality control prior to shipping\u003c\/p\u003e\n\u003cp\u003eNOTE: Requires proper sensor calibration with a programmable engine management system.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFitments:\u003c\/strong\u003e \u003cbr\u003eK20 and K24 engines using factory K Series Style MAP sensor\u003cbr\u003e2\u003cspan\u003e\u003cspan class=\"mednormal\"\u003e006+ S2000\u003cbr\u003e2002+ CR-V\u003cbr\u003e2002+ RSX\u003cbr\u003e\u003c\/span\u003e\u003c\/span\u003e\u003cspan\u003e\u003cspan class=\"mednormal\"\u003e2001+ EP-3\u003cbr\u003e2001-2005 Civic D17\u003cbr\u003e2006+ Civic Si\u003cbr\u003e2004-2008 TSX\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"JustMac Garage","offers":[{"title":"Red","offer_id":46488032149796,"sku":"","price":108.29,"currency_code":"USD","in_stock":true},{"title":"Black","offer_id":46488032182564,"sku":"","price":108.29,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0730\/3538\/3076\/files\/image_eb0e1838-c84d-40ff-8219-78fb6e8ab268.jpg?v=1692123269"},{"product_id":"speedfactory-racing-4-bar-map-sensor-k-series-06-09-s2000-06-11-civic-r18-12-15-civic-si-2013-ilx-09-10-tsx-crz-1-43-psi","title":"SpeedFactory Racing 4 Bar MAP Sensor K Series - 06-09 S2000, 06-11 Civic R18, 12-15 Civic Si, 2013+ILX, 09-10 TSX, CRZ (1-43+PSI)","description":"\u003cmeta charset=\"UTF-8\"\u003e\n\u003cp\u003e\u003cspan class=\"mednormal\"\u003eSpeedFactory 4 Bar MAP (Manifold Absolute Pressure) sensors use state of the art bipolar op amp circuitry with thin film resistor networks built into each micro chip.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003ePressure changes are calculated on a true linear 0-5 volt scale via a specially designed silicon pressure sensor that also compensates for temperature changes. The unique ability to compensate for temperature changes allows our MAP sensor to remain a minimum of 99% accurate from 32 degrees F to 180 degrees F through out its range of scale. \u003c\/span\u003e\u003cspan\u003eWith the true linear pressure vs. voltage scale there is never a need to re-tune at different altitudes as with other sensors.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan class=\"mednormal\"\u003e\u003cspan\u003e\u003cstrong\u003eKey Features:\u003c\/strong\u003e\u003cbr\u003e*Precisely calculates boost pressure from 1-43+ psi\u003cbr\u003e* 40 to 260 degrees Fahrenheit temperature operating range\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e* Able to respond from 10% of the pressure scale to 90% of the pressure scale in .001 seconds (the fastest response time of any MAP sensor on the market).\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e* Automatic temperature compensation.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e* True linear scaling for perfect drivability at all boost and vacuum levels.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e* Compatible with all aftermarket engine management systems.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e* Minimum of 99% accurate over full scale range under all conditions including temperature, altitude, and humidity changes.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e* Allows smoother engine operation, higher boost levels, and better drivability than competitors turbo MAP sensors.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e* Direct plug and play for an easy install and an OEM look. Dimensionally identical to the stock MAP sensor.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e* Each sensor is hand assembled, pressure, and function checked in the USA for unparalleled quality control prior to shipping\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eNOTE: Requires proper sensor calibration with a programmable engine management system.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eFitments:\u003cbr\u003e\u003c\/strong\u003e06-09 Honda S2000\u003cbr\u003e06-11 Civic R18\u003cbr\u003e\u003c\/span\u003e\u003cspan\u003e12-15 Civic Si\u003cbr\u003e2013+ ILX\u003cbr\u003e09-10 TSX\u003cbr\u003e\u003c\/span\u003e\u003cspan\u003e10-16 CR-Z\u003c\/span\u003e\u003c\/p\u003e","brand":"JustMac Garage","offers":[{"title":"Black","offer_id":46488041914660,"sku":"","price":108.29,"currency_code":"USD","in_stock":true},{"title":"Red","offer_id":46488041947428,"sku":"","price":108.29,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0730\/3538\/3076\/files\/image_56809ac6-0f48-43ff-a490-f4acc3c945ba.jpg?v=1692123469"},{"product_id":"speedfactory-racing-tps-throttle-position-sensor-b-d-h-f-series-engines","title":"SpeedFactory Racing (TPS) Throttle Position Sensor - B\/D\/H\/F Series Engines","description":"\u003cmeta charset=\"UTF-8\"\u003e\n\u003cp\u003eThis is a high-quality direct factory replacement TPS (Throttle Position Sensor) with included mounting hardware and gasket, and it comes with a 1-Year Warranty from original date of purchase.\u003c\/p\u003e\n\u003cp\u003eEngine Compatibility: Honda\/Acura B-Series, D-Series, H-Series, and F-Series (Accord Only)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e**IMPORTANT NOTE:\u003c\/strong\u003e Please make sure to use the provided gasket to seal out moisture from harming the sensor's internal circuitry.**\u003c\/p\u003e","brand":"JustMac Garage","offers":[{"title":"Default Title","offer_id":46489461621028,"sku":null,"price":54.14,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0730\/3538\/3076\/files\/image_c59a9298-08c3-4008-a8f8-c158f4f3bb5c.jpg?v=1692134659"},{"product_id":"speedfactory-racing-3-port-boost-control-solenoid-kit","title":"SpeedFactory Racing 3-Port Boost Control Solenoid Kit","description":"\u003cp\u003eThe SpeedFactory Racing 3-Port Boost Control Solenoid Kit allows precise boost control with a PWM (pulsewidth modulation) signal from a source (Engine Control Module or Electronic Boost Controller).\u003c\/p\u003e\n\u003cp\u003eThis solenoid can raise the boost level as high as 2-3 times the spring pressure of the wastegate. (For higher boost levels and better off-the-line boost control please see our 4 Port Boost Control Solenoid Kit).\u003c\/p\u003e\n\u003cp\u003eThis kit can be used with single or multiple wastegates, and is compatible with almost every electronic boost controller and tuning software.\u003c\/p\u003e\n\u003cp\u003eThis product can be used with internal or external wastegates.\u003c\/p\u003e\n\u003cp\u003eSpeedFactory 3-Port Boost Control Solenoid Kit Features Include:\u003c\/p\u003e\n\u003cp\u003e-0-125 PSI pressure range\u003c\/p\u003e\n\u003cp\u003e- (2) 1\/8\" x 1\/4\" barbed male fittings and (1) sintered muffler\u003c\/p\u003e\n\u003cp\u003e-24\" wires leads for easy install\u003c\/p\u003e\n\u003cp\u003e-Non-polarized wiring\u003c\/p\u003e\n\u003cp\u003e-Compatible with Haltech, Motec, Hondata, Neptune, AEM, Megasquirt, Holley, KTuner, and many more!\u003c\/p\u003e\n\u003cp\u003ePlease see our simple installation diagram in the product images section.\u003c\/p\u003e","brand":"JustMac Garage","offers":[{"title":"Default Title","offer_id":46494994202916,"sku":null,"price":106.39,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0730\/3538\/3076\/files\/image_435ed6f7-32a1-41db-bc4d-b022a2fa1754.jpg?v=1692154289"},{"product_id":"speedfactory-racing-4-port-boost-control-solenoid-mounting-bracket-with-hardware","title":"SpeedFactory Racing 4-Port Boost Control Solenoid Mounting Bracket with Hardware","description":"","brand":"JustMac Garage","offers":[{"title":"Default Title","offer_id":46495034835236,"sku":null,"price":18.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0730\/3538\/3076\/files\/image_49ba5cfd-e9e2-46fe-885f-60301cbcf052.jpg?v=1692154740"},{"product_id":"speedfactory-racing-3-port-boost-control-solenoid-mounting-bracket-with-hardware","title":"SpeedFactory Racing 3-Port Boost Control Solenoid Mounting Bracket with Hardware","description":"\u003cp\u003e\u003cstrong\u003eTheSpeedFactory Racing 3-Port Boost Control Solenoid Mounting Bracket kit allows you to securely and professionally mount your SpeedFactory Electronic Boost Control Solenoid in your engine compartment.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEach kit includes: (1) laser-cut 3\/16\" thick mounting bracket, (2) stainless steel hex head machine screws + washers, and easily mounts to your chassis using any M6x1.0 bolt of your choice.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote: The use of Loctite is strongly recommended on solenoid bracket bolt threads.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"JustMac Garage","offers":[{"title":"Default Title","offer_id":46495068881188,"sku":null,"price":18.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0730\/3538\/3076\/files\/image_9f9d2afb-2ebd-4288-a8d5-02c2d7d116a6.jpg?v=1692155031"},{"product_id":"speedfactory-racing-obd0-to-obd1-ecu-conversion-harness-for-multi-point-fuel-injection","title":"SpeedFactory Racing OBD0 to OBD1 ECU Conversion Harness for Multi-Point Fuel Injection","description":"\u003cmeta charset=\"UTF-8\"\u003e\n\u003cp\u003eThe use of an OBD-1 (92-95) ECU is needed for proper tuning of your high performance engine. The SpeedFactory OBD-0 to OBD-1 ECU Conversion Harness for Multi-Point Injection allows you to use a JDM or US OBD-1 M\/T ECU in an 88-91 Civic, CRX or a 90-91 Integra, (OBD-0) Chassis.\u003c\/p\u003e\n\u003cp\u003eWe designed our harnesses to be superior to other versions available on the market by using original equipment style ECU pin connections on all plugs, lengthening the harness leads to 7\" and by using durable automotive grade wire that exceeds OEM specifications.\u003c\/p\u003e\n\u003cp\u003eOur harness includes a 3’ pigtail and detailed instructions to simplify wiring for the sensors you need to properly complete your conversion. Wiring provisions include: 4-wire oxygen sensor, VTEC solenoid \u0026amp; pressure switch, knock sensor, and IAB solenoid (if applicable).\u003c\/p\u003e\n\u003cp\u003eCompatible vehicles:\u003c\/p\u003e\n\u003cp\u003e88-91 Civic\/CRX HF\/Si\/EX Multi-Point fuel injection models (STD \u0026amp; DX models require additional wiring)\u003c\/p\u003e\n\u003cp\u003e90-91 Integra (all models)\u003c\/p\u003e\n\u003cp\u003eThere are additional parts required to complete your OBD-0 to OBD-1 conversion when using our harness that can also be purchased at SpeedFactory.\u003c\/p\u003e\n\u003cp\u003eAdditional Parts List:\u003c\/p\u003e\n\u003cp\u003eSpeedFactory Racing OBD-0 MPFI (Vehicle) to OBD-1 (Distributor) Conversion Harness\u003c\/p\u003e\n\u003cp\u003eOBD-1 distributor for your engine\u003c\/p\u003e\n\u003cp\u003eOBD-1 4-wire Oxygen Sensor\u003c\/p\u003e\n\u003cp\u003eOBD-1 Honda ECU\u003c\/p\u003e","brand":"JustMac Garage","offers":[{"title":"Default Title","offer_id":46495108432164,"sku":null,"price":79.79,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0730\/3538\/3076\/files\/image_5bd79b15-cbf4-433c-8a46-926c25111a4d.jpg?v=1692155345"},{"product_id":"speedfactory-racing-obd2b-to-obd1-ecu-conversion-harness","title":"SpeedFactory Racing OBD2B to OBD1 ECU Conversion Harness","description":"\u003cmeta charset=\"UTF-8\"\u003e\n\u003cp\u003eThe use of an OBD-1 (92-95) ECU is needed for proper tuning of your high performance engine. The SpeedFactory Racing OBD2-B to OBD-1 Honda\/Acura ECU Conversion Harness \u003cspan class=\"GramE\"\u003eallows\u003c\/span\u003e you to use an OBD-1 Honda\/Acura M\/T ECU in a 99-00 Civic, 99-00 CR-V, 00-01 Integra, and 00-01 Accord.\u003c\/p\u003e\n\u003cp\u003eWe designed our harnesses to be superior to other versions available on the market by using original equipment style ECU pin connections on all plugs, lengthening the harness leads to 7\" and by using durable automotive grade wire that exceeds OEM specifications.\u003c\/p\u003e\n\u003cp\u003eInstallation is simple and no cutting or soldering is necessary. Plug in one side to your OBD-1 ECU and the other side into your factory engine harness.\u003c\/p\u003e","brand":"JustMac Garage","offers":[{"title":"Default Title","offer_id":46495125963044,"sku":null,"price":79.79,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0730\/3538\/3076\/files\/image_593949d1-9094-4971-833c-18ca9cfae28e.jpg?v=1692155482"},{"product_id":"speedfactory-racing-obd2a-to-obd1-ecu-conversion-harness","title":"SpeedFactory Racing OBD2A to OBD1 ECU Conversion Harness","description":"\u003cmeta charset=\"UTF-8\"\u003e\n\u003cp\u003eThe use of an OBD-1 (92-95) ECU is needed for proper tuning of your high performance engine. The SpeedFactory Racing OBD2-A to OBD-1 Honda\/Acura ECU Conversion harness \u003cspan class=\"GramE\"\u003eallows\u003c\/span\u003e you to use an OBD-1 Honda\/Acura M\/T ECU in a 96-98 (OBD-2A) Civic, Integra, Prelude, CR-V or Accord.\u003c\/p\u003e\n\u003cp\u003eWe designed our harnesses to be superior to other versions available on the market by using original equipment style ECU pin connections on all plugs, lengthening the harness leads to 7\" and by using durable automotive grade wire that exceeds OEM specifications.\u003c\/p\u003e\n\u003cp\u003eInstallation is simple and no cutting or soldering is necessary. Plug in one side to your OBD-1 ECU and the other side into your factory engine harness.\u003c\/p\u003e","brand":"JustMac Garage","offers":[{"title":"Default Title","offer_id":46495139922212,"sku":null,"price":79.79,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0730\/3538\/3076\/files\/image_7cd2fab3-9621-4340-82cd-a61120727193.jpg?v=1692155645"},{"product_id":"speedfactory-racing-obd1-to-obd2a-reverse-ecu-conversion-harness","title":"SpeedFactory Racing OBD1 to OBD2A (Reverse) ECU Conversion Harness","description":"\u003cp\u003eThe SpeedFactory Racing OBD1 to OBD2A Honda\/Acura ECU Conversion Harness allows you to use any OBD2A Honda\/Acura M\/T ECU in a 92-95 Civic, 92-95 Acura Integra, 92-95 Honda Accord (4 Cylinder), 92-95 Honda Prelude, and 92-95 Honda DelSol. This harness is perfect for utilizing JDM Spec ECUs that are often included with Japanese engine swaps.\u003c\/p\u003e\n\u003cp\u003eWe designed our harnesses to be superior to other versions available on the market by using original equipment style ECU pin connections on all plugs, lengthening the harness leads to 7\" and by using durable automotive grade wire that exceeds OEM specifications.\u003c\/p\u003e\n\u003cp\u003eInstallation is simple and no cutting or soldering is necessary (for JDM SPEC ECUs). Plug in one side of the harness to your OBD2A ECU and the other side into your factory OBD1 chassis harness.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eNote: For USDM Spec ECU applications, installation will require a secondary 4-wire oxygen sensor .\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"JustMac Garage","offers":[{"title":"Default Title","offer_id":46495225938212,"sku":null,"price":107.34,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0730\/3538\/3076\/files\/image_44b3085f-3683-4522-b401-e64e6ef36c9d.jpg?v=1692156432"},{"product_id":"speedfactory-racing-obd2-vehicle-to-obd1-distributor-conversion-harness","title":"SpeedFactory Racing OBD2 (Vehicle) to OBD1 (Distributor) Conversion Harness","description":"\u003cdiv id=\"shopify-section-tab-horizontal-2\" class=\"shopify-section\"\u003e\n\u003cdiv class=\"productView-description\"\u003e\n\u003cdiv class=\"tab-content\"\u003e\n\u003cdiv id=\"tab1\" class=\"tab-description tab-pane fade show active\" role=\"tabpanel\"\u003e\n\u003cdiv class=\"toggle-content collapse show\" id=\"tab1_mobile\"\u003e\n\u003cdiv\u003e\n\u003cp\u003eSpeedFactory Racing Distributor Conversion Harnesses were developed to save you time and also to help eliminate the many common problems associated with distributor re-wiring.\u003c\/p\u003e\n\u003cp\u003ePerfect for engine swaps or mis-matched distributor-to-engine harness situations, we designed our harnesses to be superior to other versions available on the market by using original equipment style pin connections on all plugs, keeping the leads to a safe yet functional length, and by using durable automotive grade wire that meets \/ exceeds OEM specifications.\u003c\/p\u003e\n\u003cp\u003eInstallation is simple and no cutting or soldering is necessary. Plug in one side of the harness to your OBD-2 vehicle and the other side into your OBD-1 Distributor.\u003c\/p\u003e\n\u003cp\u003e**Note: Harnesses are compatible with 10-pin style OBD-2 Plugs only.**\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"JustMac Garage","offers":[{"title":"Default Title","offer_id":46495278989604,"sku":null,"price":31.34,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0730\/3538\/3076\/files\/image_e45d716a-0df2-48d7-9f4a-20a07daf891b.jpg?v=1692156670"},{"product_id":"speedfactory-racing-obd1-vehicle-to-obd2-distributor-conversion-harness","title":"SpeedFactory Racing OBD1 (Vehicle) to OBD2 (Distributor) Conversion Harness","description":"\u003cp\u003eSpeedFactory Racing Distributor Conversion Harnesses were developed to save you time and also to help eliminate the many common problems associated with distributor re-wiring.\u003c\/p\u003e\n\u003cp\u003ePerfect for engine swaps or mis-matched distributor-to-engine harness situations, we designed our harnesses to be superior to other versions available on the market by using original equipment style pin connections on all plugs, keeping the leads to a safe yet functional length, and by using durable automotive grade wire that meets \/ exceeds OEM specifications.\u003c\/p\u003e\n\u003cp\u003eInstallation is simple and no cutting or soldering is necessary. Plug in one side of the harness to your OBD-1 vehicle and the other side into your OBD-2 Distributor.\u003c\/p\u003e\n\u003cp\u003e**Note: Harnesses are compatible with 10-pin style OBD-2 Plugs only**\u003c\/p\u003e","brand":"JustMac Garage","offers":[{"title":"Default Title","offer_id":46495317557540,"sku":null,"price":31.34,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0730\/3538\/3076\/files\/image_94ced0ac-4c0d-4067-bad5-b579c90a853c.jpg?v=1692156938"},{"product_id":"speedfactory-racing-obd0-mpfi-vehicle-to-obd1-distributor-conversion-harness","title":"SpeedFactory Racing OBD0 MPFI (Vehicle) to OBD1 (Distributor) Conversion Harness","description":"\u003cmeta charset=\"UTF-8\"\u003e\n\u003cp\u003eSpeedFactory Racing OBD0 MPFI (Vehicle) to OBD1 (Distributor) Conversion Harness\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eSpeedFactory Racing Distributor Conversion Harnesses were developed to save you time and also to help eliminate the many common problems associated with distributor re-wiring.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003ePerfect for engine swaps or mis-matched distributor-to-engine harness situations, we designed our harnesses to be superior to other versions available on the market by using original equipment style pin connections on all plugs, keeping the leads to a safe yet functional length, and by using durable automotive grade wire that meets \/ exceeds OEM specifications.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eInstallation is simple and no cutting or soldering is necessary. Plug in one side of the harness to your OBD0 1988-91 MPFI vehicle and the other side into your OBD-1 Distributor.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNeed an OBD0 MPFI to OBD-1 ECU Conversion Harness also\u003c\/strong\u003e\u003c\/p\u003e","brand":"JustMac Garage","offers":[{"title":"Default Title","offer_id":46495343247652,"sku":null,"price":31.34,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0730\/3538\/3076\/files\/image_23ba91da-08d7-4c92-9e15-766fae2282f4.jpg?v=1692157039"},{"product_id":"speedfactory-racing-3-bar-map-sensor-k-series-06-09-s2000-06-11-civic-r18-12-15-civic-si-2013-ilx-09-10-tsx-crz-1-29-psi","title":"SpeedFactory Racing 3 Bar MAP Sensor K Series - 06-09 S2000, 06-11 Civic R18, 12-15 Civic Si, 2013+ILX, 09-10 TSX, CRZ (1-29+PSI","description":"\u003cmeta charset=\"UTF-8\"\u003e\n\u003cp\u003e\u003cspan\u003eSpeedFactory 3 Bar MAP (Manifold Absolute Pressure) sensors use state of the art bipolar op amp circuitry with thin film resistor networks built into each micro chip.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003ePressure changes are calculated on a true linear 0-5 volt scale via a specially designed silicon pressure sensor that also compensates for temperature changes. The unique ability to compensate for temperature changes allows our MAP sensor to remain a minimum of 99% accurate from 32 degrees F to 180 degrees F through out its range of scale. With the true linear pressure vs. voltage scale there is never a need to re-tune at different altitudes as with other sensors.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eKey Features:\u003c\/strong\u003e \u003cbr\u003e\u003cspan\u003e*Precisely calculates boost pressure from 1-29+ psi\u003cbr\u003e\u003c\/span\u003e\u003cspan\u003e* 40 to 260 degrees Fahrenheit temperature operating range\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e* Able to respond from 10% of the pressure scale to 90% of the pressure scale in .001 seconds (the fastest response time of any MAP sensor on the market).\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e* Automatic temperature compensation.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e* True linear scaling for perfect drivability at all boost and vacuum levels.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e* Compatible with all aftermarket engine management systems.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e* Minimum of 99% accurate over full scale range under all conditions including temperature, altitude, and humidity changes.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e* Allows smoother engine operation, higher boost levels, and better drivability than competitors turbo MAP sensors.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e* Direct plug and play for an easy install and an OEM look. Dimensionally identical to the stock MAP sensor.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e* Each sensor is hand assembled, pressure, and function checked in the USA for unparalleled quality control prior to shipping\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eNOTE: Requires proper sensor calibration with a programmable engine management system.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eFitments:\u003cbr\u003e\u003c\/strong\u003e06-09 Honda S2000\u003cbr\u003e06-11 Civic R18\u003cbr\u003e\u003c\/span\u003e\u003cspan\u003e12-15 Civic Si\u003cbr\u003e2013+ ILX\u003cbr\u003e09-10 TSX\u003cbr\u003e\u003c\/span\u003e\u003cspan\u003e10-16 CR-Z\u003c\/span\u003e\u003c\/p\u003e","brand":"JustMac Garage","offers":[{"title":"Black","offer_id":46495394365732,"sku":"","price":108.29,"currency_code":"USD","in_stock":true},{"title":"Red","offer_id":46495394398500,"sku":"","price":108.29,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0730\/3538\/3076\/files\/image_ec009364-9325-47c3-828a-4fad8e23c03b.jpg?v=1692157263"},{"product_id":"speedfactory-racing-b-series-vtec-coil-on-plug-adapter-plate","title":"SpeedFactory Racing B-Series VTEC Coil On Plug Adapter Plate","description":"\u003cmeta charset=\"UTF-8\"\u003e\n\u003cp\u003e\u003cspan\u003eCommonly known performance issues with OEM Honda\/Acura distributor igniters at higher power levels cause many people to convert to more reliable COP (coil on plug) style ignition systems, and the SpeedFactory Racing B-Series VTEC Coil On Plug Adapter Plate is necessary for those making the switch. Our black anodized, CNC-machined billet aluminum plate will perfectly fit atop your B-Series VTEC valve cover to adapt OEM fitment K-Series ignition coils to your engine. \u003c\/span\u003e\u003cspan\u003e\u003cem\u003e\u003cstrong\u003eWe strongly recommend choosing the OEM Denso Ignition Coil option for best results.\u003c\/strong\u003e\u003c\/em\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"JustMac Garage","offers":[{"title":"Default Title","offer_id":46495675515172,"sku":null,"price":88.34,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0730\/3538\/3076\/files\/image_c9f9233f-3ae2-4ee2-9c5e-029a2c28aa54.jpg?v=1692160070"},{"product_id":"speedfactory-racing-billet-distributor-cap-delete","title":"SpeedFactory Racing Billet Distributor Cap Delete","description":"\u003cp\u003eCommonly known performance issues with OEM Honda\/Acura distributor igniters cause many people to convert to more reliable COP (coil on plug) style ignition systems.\u003c\/p\u003e\n\u003cp\u003eThe SpeedFactory Billet Distributor Cap Delete was developed for COP-converted Honda\/Acura engine setups utilizing the factory internal distributor sensors.\u003c\/p\u003e\n\u003cp\u003eThis cap delete is CNC machined from billet aluminum and comes in a high quality black anodized finish with laser engravings. This is designed to fit perfectly on OEM distributors only, aftermarket distributors can have slightly different fitment.\u003c\/p\u003e\n\u003cp\u003eOur cap deletes fit the following applications:\u003c\/p\u003e\n\u003cp\u003e1992-2000 Honda Civic (all D15\/D16 engines)\u003c\/p\u003e\n\u003cp\u003e1999-2000 Honda Civic Si (B16A2 engine)\u003c\/p\u003e\n\u003cp\u003e1994-1997 Honda Delsol Si VTEC (B16A3 engine)\u003c\/p\u003e\n\u003cp\u003e1992-1996 Honda Prelude Si (H22 \/ H23 engines)\u003c\/p\u003e\n\u003cp\u003e1993-2001 Honda Prelude VTEC (all models)\u003c\/p\u003e\n\u003cp\u003e1990-2001 Acura Integra LS\/RS\/GS\/GS-R (all B18A\/B\/C engines)\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cem\u003e\u003cstrong\u003eSpecific Distributor Cap Delete Fitments\u003c\/strong\u003e\u003c\/em\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003e\u003cspan\u003eSF-02-082\u003c\/span\u003e\u003c\/strong\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003eB16, B18A\/B (LS), D15, D16, (OEM Part Numbers TD41U, TD42U, TD44U, TD46U, TD55U, TD61U, TD73U, TD74U, TD81U)\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cem\u003e\u003cstrong\u003eSF-02-082-H\u003cbr\u003e\u003c\/strong\u003e\u003c\/em\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eH22 \/ H23 (Reverse Logo, cap has upside-down positioning in engine bay)\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cem\u003e\u003cstrong\u003eSF-02-083\u003cbr\u003e\u003c\/strong\u003e\u003c\/em\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eUSDM \/ JDM B18C\/C1\/C5 (GSR\/TypeR) (OEM Part Numbers TD86U, TD87U, TD68U)\u003c\/span\u003e\u003c\/p\u003e","brand":"JustMac Garage","offers":[{"title":"B18C\/C1\/C5 (get\/typeR)","offer_id":46495748292900,"sku":null,"price":89.29,"currency_code":"USD","in_stock":true},{"title":"H22\/H23","offer_id":46495748325668,"sku":null,"price":89.29,"currency_code":"USD","in_stock":true},{"title":"B16\/b18A\u0026B\/D16\/D16","offer_id":46495748358436,"sku":null,"price":89.29,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0730\/3538\/3076\/files\/image_cf098931-b7ad-4b33-9a3c-a39d98963b7e.jpg?v=1692160357"},{"product_id":"speedfactory-racing-honda-awd-billet-flange-adaptor-kit","title":"SpeedFactory Racing Honda AWD Billet Flange Adaptor Kit","description":"\u003cmeta charset=\"UTF-8\"\u003e\n\u003cp\u003ePut the power through your driveshaft reliably by upgrading your U-joints to 1310's with the help of our Flange Adaptor Kit.\u003c\/p\u003e\n\u003cp\u003eStock Wagovan driveshaft U-joints are tiny and weak, these flange adaptors allow you upgrade to 1310 U-joints to withstand the demands of high horsepower applications and provide reliability that cannot be achieved with your weak and worn out old original Wagovan u-joints.\u003c\/p\u003e\n\u003cp\u003e*These adaptors go on the \u003cstrong\u003e\u003cem\u003eREAR driveshaft tube section in between the viscous coupler \u0026amp; driveshaft and in between the driveshaft and rear differential. Other components are needed such as 1310 U-joints and yokes - these adaptors allow those parts to bolt up to a Wagovan viscous coupler and rear differential.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Features:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul type=\"disc\"\u003e\n\u003cli\u003ex8 High Strength Grade 10.9 bolts, stainless steel washers, and Nylock nuts to prevent loosening due to driveshaft vibration and harmonics\u003c\/li\u003e\n\u003cli\u003ex2 Precision CNC machined 6061-T6 billet aluminum flange adaptors\u003c\/li\u003e\n\u003cli\u003eBlack Anodized finish adds durability and eliminates corrosion\u003c\/li\u003e\n\u003cli\u003eLaser-etched SpeedFactory Racing logo\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"JustMac Garage","offers":[{"title":"Default Title","offer_id":46497969111332,"sku":null,"price":151.99,"currency_code":"USD","in_stock":true}]},{"product_id":"blox-racing-tps-for-honda-b-d-h-f-series-engines","title":"BLOX Racing TPS","description":"\u003cp\u003e\u003cspan\u003eBLOX Racing TPS for Honda - All \u003c\/span\u003e\u003c\/p\u003e","brand":"JustMac Garage","offers":[{"title":"B\/D\/H\/F series","offer_id":48171139531044,"sku":"","price":49.6,"currency_code":"USD","in_stock":true},{"title":"K series","offer_id":48171139563812,"sku":"","price":49.6,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0730\/3538\/3076\/files\/IMG-2562.jpg?v=1709256840"},{"product_id":"blox-racing-tps-version-2-k-series","title":"BLOX Racing TPS Version 2 k series","description":"\u003cp\u003e\u003cspan\u003eThe throttle position sensor (TPS) is basically a potentiometer that provides a variable resistance dependent upon the position of the throttle. There are many different instances when one needs to be replaced. Consequently, in order to purchase a replacement your only options were to buy a brand new throttle body assembly from the local Honda dealer or to find a used one from a local junk yard. However, BLOX Racing offers an economical solution for replacement throttle position sensors. All BLOX Racing TPS are brand new and are provided with a gasket. *Note:* TPS not available for Honda single point ignition systems. \u003c\/span\u003e\u003c\/p\u003e","brand":"JustMac Garage","offers":[{"title":"Default Title","offer_id":48171140710692,"sku":"","price":70.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0730\/3538\/3076\/files\/IMG-2563.jpg?v=1709257178"},{"product_id":"blox-racing-92-00-honda-civic-94-01-acura-integra-s2000-clutch-master-cylinder-adapter","title":"BLOX Racing 92-00 Honda Civic \/ 94-01 Acura Integra S2000 Clutch Master Cylinder Adapter","description":"\u003cp\u003e\u003cspan\u003eThe BLOX Racing S2000 Clutch Master Cylinder Adapter allows enthusiasts to directly bolt on a BLOX clutch master cylinder inside their Civic or Integra engine bay. Using the S2000 CMC helps complete your wire-tucked, engine bay. The CMC can also be used with an OEM Honda S2000 clutch master cylinder. The BLOX S2000 Clutch Master Cylinder is available separately and is also an ideal direct OEM replacement product for the Honda S2000. BLOX CMC Adapters are available in anodized black, silver and raw aluminum. MADE IN THE USA \u003c\/span\u003e\u003c\/p\u003e","brand":"JustMac Garage","offers":[{"title":"Polished","offer_id":48171345871140,"sku":"","price":25.6,"currency_code":"USD","in_stock":true},{"title":"Black","offer_id":48171345903908,"sku":"","price":25.6,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0730\/3538\/3076\/files\/IMG-2589.jpg?v=1709263127"},{"product_id":"innovative-92-00-honda-civic-excl-vx-90-01-acura-integra-b-series-shift-linkage","title":"Innovative 92-00 Honda Civic (Excl. VX) \/ 90-01 Acura Integra B-Series Shift linkage","description":"\u003cp\u003e\u003cspan\u003eInnovative 92-00 Honda Civic (Excl. VX) \/ 90-01 Acura Integra B-Series Shift linkage \u003c\/span\u003e\u003c\/p\u003e","brand":"JustMac Garage","offers":[{"title":"Default Title","offer_id":49828192092452,"sku":"","price":157.45,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0730\/3538\/3076\/files\/IMG-5036.jpg?v=1725380078"}],"url":"https:\/\/justmacgarage.com\/collections\/sensors-adapters\/mpn-1sc19581-std.oembed","provider":"JustMac Garage","version":"1.0","type":"link"}